SPD1000X — Single-output Programmable Linear DC Power Supplies
Compact programmable linear DC supplies for bench development, education and automated test. The series includes 16 V / 8 A and 30 V / 5 A models with low ripple, fast transient response, waveform display, save/recall and SCPI control.
| Model | Output Voltage | Output Current | Power | Resolution | Sense |
|---|---|---|---|---|---|
| SPD1168X | 0–16V | 0–8A | 128W | 1mV / 1mA | 2-wire |
| SPD1305X | 0–30V | 0–5A | 150W | 1mV / 1mA | 2-wire / 4-wire compensation |
Key Features
Two Single-output Models
Choose SPD1168X for 16 V / 8 A loads or SPD1305X for 30 V / 5 A rails. Both are compact programmable linear supplies for general bench work and automated test.
Low Ripple and Fast Response
Low ripple and noise, together with transient response below 50 µs, makes the series suitable for sensitive analog, embedded and mixed-signal prototype powering.
1 mV / 1 mA Setting Resolution
Five-digit voltage and four-digit current display with 1 mV / 1 mA minimum resolution gives better control than basic manual bench supplies.
Remote Control and Timing Output
USB remote operation, SCPI support, LabVIEW driver support and front-panel timing output functions support repeatable test sequences and simple automation.
4-wire Compensation on SPD1305X
The SPD1305X includes 4-wire compensation output mode with up to 1 V compensation, useful when lead resistance affects voltage accuracy at the DUT.
Waveform Display and Save/Recall
The 2.8-inch TFT display supports real-time wave display, while five internal save/recall groups help restore common bench and production settings quickly.
Specifications
| Parameter | Unit | Value / Description |
|---|---|---|
| OUTPUT MODELS | ||
| SPD1168X output | V / A / W | 0–16 V · 0–8 A · up to 128 W |
| SPD1305X output | V / A / W | 0–30 V · 0–5 A · up to 150 W |
| Output path | — | Single programmable output |
| PERFORMANCE | ||
| Ripple and noise | — | ≤350 µVrms / 3 mVpp; <2 mArms |
| Transient response | µs | <50 |
| Setting resolution | — | 1 mV / 1 mA |
| Display | — | 2.8-inch true-colour TFT-LCD; 5-digit voltage / 4-digit current |
| ACCURACY | ||
| Voltage setting/readback | — | ±(0.03% of reading + 10 mV) |
| Current setting/readback | — | ±(0.3% of reading + 10 mA) |
| CONTROL AND OPERATION | ||
| Output modes | — | Two-wire output; 4-wire compensation on SPD1305X |
| Maximum compensation voltage | V | 1 |
| Remote control | — | USB Device; SCPI; LabVIEW driver support |
| Save/recall | — | 5 internal groups |
| AC input compatibility | V | 100 / 120 / 220 / 230 |
Applications
Prototype Power
Stable programmable DC supply for MCU boards, FPGA boards, sensors and mixed-signal prototypes.
Teaching Lab Supply
Compact single-output programmable supply for electronics, instrumentation and basic power courses.
Simple Automated Test
SCPI control and save/recall support repeatable voltage setup in small production and QC benches.
Low-ripple Circuit Biasing
Low ripple output is useful for op-amp, sensor, reference and analog front-end evaluation.
Repair and Diagnostics
Programmable voltage/current limits help safely power boards during troubleshooting and repair.
Current-limit Characterisation
CV/CC operation supports controlled supply ramps, current-limit checks and DUT protection testing.
Similar Products
